Canon LBP-1210 Service Manual page 29

G Ports Tab
Use this tab to select the port to which the printer is connected. It can be opened by clicking
the Ports tab in the Properties dialog box.
The ports tab is shown in Figure 1-7-6.
Canon LASER SHOT LBP-1210 Properties
Ports
General
Canon LASER SHOT LBP-1210
Print to the following port[s]. Documents will print to the first free
checked port.
Port
LPT1:
LPT2:
LPT3:
COM1:
(1)
COM2:
COM3:
COM4:
FILE:
(2)
Add Port...
(3)
Enable bidirectional support
Enable printer pooling
(5) (6)
(1) Print to the following port(s) : Lists the ports to which the printer can be connected. Select
one or more port(s) to which the printer is to be connected. The error dialog box will appear
if an nonexistent LPT port has been selected and a print is commanded.
(2) Add Port... : Opens Printer Ports so that you can add ports. (See Page 1-22.)
(3) Delete Port : Opens the Delete Port dialog box so that you can delete the selected ports.
(4) Configure Port : Opens the Configure LPT Port dialog box which enables you to set ports.
(See Page 1-23.)
(5) Enable bidirectional support : Selects whether or not the Language Monitor is used for bi-
directional communication between the computer and printer.
(6) Enable printer pooling : Selects whether or not the printer pool is used. Clicking the check
box enables you to select multiple ports in the following Printer Ports list box. The printer
does not support printer pool.
Scheduling Sharing Security
Description
Local Port
Local Port
Local Port
Local Port
Local Port
Local Port
Local Port
Local Port
Delete Port
Figure 1-7-6
Select Forms
Printer
Canon LASER SHOT LBP-1210
Configure Port...
Cancel
OK
CHAPTER 1
? X
(4)
1 - 21