III. MAIN UNITS
A. Laser/Scanner Unit
1) Remove the top cover unit.
2) Open the cartridge cover.
3) Open the bushing outward and remove
the laser shutter and spring.
4) Disconnect the flat cable.
5) Disconnect the connector.
➄
➃
➀ Bushing
➁ Laser shutter
➂ Spring
➃ Flat cable
➄ Connector
Figure 3-3-1
6) Remove the four screws and the
laser/scanner unit.
➀
➀ Screws
Figure 3-3-2
7) Remove the cables from the cable
guide.
8) Remove the screw.
9) Unhook the four claws and remove the
lid.
10) Disconnect the connector inside.
➃
➁
➄
➂
➀ Cable guide
➂ Screw
➀
➄ Lid
CHAPTER 3
➀
➃
➁ Cables
➃ Claws
Figure 3-3-3
3 - 7
➁
➂