D. Transfer Charging Roller
1) Open the cartridge cover.
2) Unhook the two claws and remove the
transfer charging roller.
➁
➀ Claws
➁ Transfer charging roller
Figure 3-4-9
<Note for reassembling>
When reassembling the transfer charging
roller, do not hold the sponge parts of it. Be
sure to hold its shaft and bushings.
E. Fixing Film Unit
1) Remove the fixing unit (page 3-9; 1-12).
2) Remove the two screws and the face-
3) Remove the two screws and the fixing
➀
➀ Screws
➁ Face-down delivery roller unit
➂ Screws
➃ Fixing cover
4) Turn the spring retainer in the direc-
5) Remove the plate.
➀ Spring retainer
➂ Plate
down delivery roller unit.
cover.
➀
➃
Figure 3-4-10
tion of the arrow as pressing it down
and remove it and the spring.
➁
➂
➁ Spring
Figure 3-4-11
CHAPTER 3
➁
➂
➀
3 - 15