Canon LBP-1210 Service Manual page 23

b. Installation Procedures
G Connecting as a Local Printer
This section describes how to install CAPT for using the printer as a local printer. Install it to
the computer by following the procedures below.
For details, see the User's Manual packed with the printer.
1. Switch on the computer to which the printer is connected and start up Microsoft Windows
NT.
2. Log in as an Administrator.
3. Perform one of the following methods to start up Add Printer Wizard.
• Start button / Settings / Printers / Printers folder / Open Add Printer.
• My Computer / Printers folder / Open Add Printer.
• Explorer / Desktop / My Computer / Printers / Open Add Printer.
4. Add Printer Wizard (Initial Screen)
Select either the printer is to be used as a local printer or network printer. The following pro-
cedures describe the installation for using the printer as a local printer by selecting My
Computer. For using the printer as a network printer, see Page 1-16 for details.
5. Add Printer Wizard (Selecting the Port)
Select the port to which the printer is connected. If the port is not available, click the Add
Port button to create a new port.
Clicking the check box for 'Enable printer pooling' enables the selecting of multiple ports
from the Available Ports list box simultaneously.
6. Add Printer Wizard (Selecting the Printer 1)
Insert the CD-ROM into the computer, click on the Have Disk button to open the Install From
Disk dialog box.
Enter the name of the CD-ROM drive in the text box of 'Copy manufacture's files from:' and
then click the Browse button.
7. Add Printer Wizard (Selecting the Printer 2)
If the name of the printer appears in the Printers list box, and the printer you are installing
is selected, click the Next button. If you want to change the printer, click the Have Disk but-
ton to reselect the INF file.
8. Add Printer Wizard (Selecting Overwriting)
This window appears only when the same driver has already been installed.
Select whether or not the existing driver is to be overwritten by the newly installed driver.
9. Add Printer Wizard (Changing the Printer Name)
Enter the printer name to the Printer Name text box. Select whether or not the printer is to
be a default printer.
10. Add Printer Wizard (Selecting Shared/Not Shared)
Select whether or not the computer is to be designated as a print server and the printer is
to be shared by other client computers on a network. You can change this setting after
installing CAPT.
11. Add Printer Wizard (Selecting Printing a Test Page)
Select whether or not the printer is to print a test page after you have finished installing
CAPT.
12. Coping Files...
As the installation is started, the 'Coping Files...' dialog box appears.
13. End of Installation
When the installation has completed, restart Microsoft Windows as instructed by the on-
screen message. When the printer is connected, you will be asked whether you want to print
a test page. Print a test page to confirm that the installation has been made properly.
CHAPTER 1
1 - 15