D. Cleaning During a Service Visit
➀
1: Fixing entrance guide
3: Feed roller
5: Pick-up roller
Clean the printer during a service visit, follo
1. Fixing entrance guide
Clean with dry lint free paper.
2. Transfer charging roller
In general, the transfer charging roller is not to be touched or cleaned. If unavoidable, clean the
roller with dry lint free paper. Do not use water or solvent. Make sure not to contaminate the
roller with solvent or oil.
3. Feed roller
Clean with dry lint free paper.
4. Separation pad
Clean the rubber part with dry lint free paper.
5. Pick-up roller
Clean with dry lint free paper.
➁
➂
➃
➄
Figure 4-8-1
2: Transfer charging roller
4: Separetion pad
CHAPTER 4
4 - 23