Canon LBP-1210 Service Manual page 22

CHAPTER 1
B. Microsoft Windows NT4.0
1. Installation of CAPT
A Canon Advanced Printing Technology installation disk is packed with this printer.
The type and contents of the disc are as follows:
Type :
• A 5-inch CD-ROM disk
Contents :
• CAPT driver
• Language monitor
• Status window
• Parallel port driver
• Installer
• CD-ROM menu
• Uninstaller
• Trouble shooter
• On-line help
• On-line manual
• Voice message
a. Operating Environment
The following environment is required to install CAPT:
G PC hardware
This printer supports the IBM-PC and its compatible computers. The operating conditions are
as shown below:
<Minimum Operating Environment>
• CPU: Pentium 133 MHz or above
• RAM: 32 MB or above
• Available memory on the disk: 10 MB or above
• Printer port: Standard Centronics parallel port
• CD-ROM drive
• Sound: PCM sound module is required to use the voice message.
• Monitor size: 640 x 480 or above, 16 colors or above
• Network: 10 Base-T or 100 Base-TX is required to use the optional network adapter.
<Recommended Operating Environment>
• CPU: Pentium III 600 MHz or above
• RAM: 64 MB or above
G OS software
This printer operates only on Microsoft Windows NT x86 (Intel). It dose not operate on Alpha,
MIPS or PPC.
This printer does not operate on other OSs such as Windows NT3.x, Windows 3.x, Windows
for Workgroups, Windows CE, or Windows on OS/2. In general, Windows language and the
software language of this printer must match.
G Printer cable
• Use a bi-directional 8-bit parallel interface cable for the IBM-PC.
• Connections through the printer selector and printer buffer are not supported.
1 - 14