Canon LBP-1210 Service Manual page 200

APPENDEX
Message area: Service Error
Error message area: Printer error. Contact the store where you bought the printer.
Content: Service errors occur in the printer engine.
Perform the Trouble Shooting in Chapter 4.
Message area: Clear Paper Jam
Error message area: 1.Open cover 2.Remove toner cartridge 3.Remove jammed paper
Content: A paper jam has occurred in the printer.
Action: Follow the instructions indicated in the Error message area.
Message area: Clear Paper Jam
Error message area: 4.Replace toner cartridge 5.Close cover
Content: A jam has occurred and then the cartridge cover has been opened.
Action: Follow the instructions indicated in the Error message area.
Message area: Close Printer Cover
Error message area: None
Content: The cartridge cover is open.
Action: Close the cartridge cover.
Message area: Check Toner Cartridge
Error message area: None
Content: The toner cartridge is not present in the printer. Or, the cartridge is not installed cor-
rectly.
Action: Set the cartridge correctly.
Message area: Change paper to xxx
Error message area: Change paper to xxx or force to print on yyy.
Content: The paper to be printed (yyy), recognized by the driver, differs from the specified paper
(xxx).
Action: Switching the paper to xxx causes the printer to automatically resume printing. Or,
clicking the Resume Job button causes the printer to resume printing with the present
paper.
Message area: Add xxx Paper
Error message area: No paper loaded in printer
Content: Print paper is not set in the printer.
Action: Set print paper in the printer.
Message area: Printing Failed
Error message area: Data transfer to the printer was too late or a data transfer error occurred.
Perform the following. 1.Discard last printed page. 2.Resume printing.
Content: Data transfer to the printer was too late, or a data transfer error occurs due to a par-
allel port setting failure. Or, the printer cable is disconnected or the port is connected to
another printer during printing.
Action: If you follow the instructions indicated in the Error message area, the printer will print
with lower resolution.
Message area: Insufficient Memory
Error message area: Quit all unnecessary applications running on the machine to which the
printer is connected.
Content: The printer cannot obtain enough work memory for the language monitor.
Action: Follow the instructions indicated in the Error message area.
A - 8