Canon LBP-1210 Service Manual page 150

CHAPTER 3
4) As pressing down the sensor lever, arm,
and the claw, slide the pick-up roller
unit in the direction of the arrow.
➁
➀
➀ Sensor lever ➁ Arm
➂ Claw ➃ Pick-up roller unit
Figure 3-4-6
5) Remove the separation pad using a
straight blade screwdriver.
➀
➀ Separation pad
Figure 3-4-7
3 - 14
➂
➃
<Note for reassembling>
When reassembling the separation pad, be
sure the projections on the back of the pad
aligns with the holes on the holder.
➁
➀ Projections ➁ Holes
Figure 3-4-8
➀