Stereo-Ddl-S; Stereo-Ddl-L; Sampler-S - Art SGX-NightBass User Manual

STEREO-DDL-S

[STREO-DDL-S], [DDL]
Stereo Digital Delay - Short
Parameters:
:DLY-L* = [80ms] 0 to 1100ms
:L-FINE* = [0ms] 0 to 50ms in 1ms increments
:DLY-R* = [110ms] 0 to 1100ms
:R-FINE* = [0ms] 0 to 50ms in 1ms increments
increments:5ms;0-350, 10ms;350-700
20ms;700-1000, 50ms;1000-1100
:REGEN = [76%] 0 to 100 percent in % increments
:HFDAMP = [0%] 0 to 100 percent in % increments
:LEVEL= [100%] 0 to 100 percent in % increments
*Total possible delay is 1150ms

STEREO-DDL-L

[STREO-DDL-L], [DDL]
Stereo Digital Delay - Long
Parameters:
:DLY-L=* [250ms] 0 to 1300ms
:L-FINE* = [0ms] 0 to 50 ms in 1 ms increments
:DLY-R* = [125ms] 0 to 1300ms
:R-FINE* = [0ms] 0 to 50ms in 1ms increments
increments:5ms;0-350, 10ms;350-700
20ms;700-1000, 50ms;1000-1300
:REGEN= [45%] 0 to 100 percent in % increments
:HFDAMP= [0%] 0 to 100 percent in % increments
:LEVEL= [100%] 0 to 100 percent in % increments
*Total possible delay is 1350ms
You can split image or create alternating regenerative patterns between the left
and right outputs using Stereo Digital Delay. The ability to set separate delay
times for each channel enables you to do this. When used in conjunction with the
Flanger, Chorus or Panner, spatial effects are the result. Regeneration is
derived from the left channel.
When longer delay times are needed, use the STREO-DDL-L algorithm. Set both Left
and Right Delay times at 1300 ms for maximum delay output with no separation. You
may also operate this effect in mono.

SAMPLER-S

[SAMPLER-S], [SMP]
Sampler-Short
Parameters:
STAT= [REC-RDY] REC-RDY, PLAY, IDLE
RECORD= [AUTO] AUTO, MANUL, MIDI
PLAY= [SINGLE] SINGLE, PUNCHIN, MIDI, REPEAT, AUDIO
33