Delay Algorithms; Tap'd-Ddl-S; Tap'd-Ddl-L - Art SGX-NightBass User Manual

Gated reverb TYPEs have differences in their decay characteristics. The
difference between normal reverb decays and decays when a gated program is the
normal decay gradually fades into nothing while the gated decay ends in an abrupt
manner. A "Sloped" gate follows a normal decay curve, and then when a certain
level threshold is reached, it shuts off. Reverse decay increases in level as the
signal decays and then shuts off short when the threshold level is reached. The
most interesting gated program is the flat setting. Here, there is no decay but
the equivalent of a short burst of sound which shuts off abruptly.
A common practice with reverb is to use it with delay. The IN parameter allows
you to place the reverb in parallel (PRE) with the delay to fatten up the reverb
sound, or, after the delay (POST), allowing you to separate the initial sound
from the reverb for clarity.

TAP'D-DDL-S

[TAP'D-DDL-S], [DDL]
Tapped Digital Delay - Short
Parameters:
:TYPE:= [FLAT-1m] FLAT-1m, FLAT-1s, RVRS-1m, RVRS-1s, SLOPE1m, SLOPE1s, (E)
FLAT-2m, FLAT-2s, RVRS-2m, RVRS-2s, SLOPE2m, SLOPE2s, (S)
FLAT-3m, FLAT-3s, RVRS-3m, RVRS-3s, SLOPE3m, SLOPE3s
:TAPS= [2] 1 to 7 in one step increments
:DELAY* = [100ms] 0 to 960ms
increments:5ms;0-350, 10ms;350-700
20ms;700-960
D-FINE* = [0ms] 0 to 50ms in 1ms increments
:REGENeration = [76%] 0 to 100 percent in % increments
:LEVEL= [100%] 0 to 100 percent in % increments
*Total delay possible is 1010ms.

TAP'D-DDL-L

[TAP'D-DDL-L], [DDL]
Tapped Digital Delay - Long
Parameters:
:TYPE:= [FLAT-1m] FLAT-1m, FLAT-1s, RVRS-1m, RVRS-1s, SLOPE1m, SLOPE1s, (E)
FLAT-2m, FLAT-2s, RVRS-2m, RVRS-2s, SLOPE2m, SLOPE2s, (S)
FLAT-3m, FLAT-3s, RVRS-3m, RVRS-3s, SLOPE3m, SLOPE3s
:TAPS= [3] 1 to 7 in one step increments
:DELAY* = [240ms] 0 to 1100ms
increments:5ms;0-350, 10ms;350-700
20ms;700-1000, 50ms;1000-1100
D-FINE* = [0ms] 0 to 50ms in 1ms increments
:REGENeration = [76%] 0 to 100 percent in % increments
:LEVEL= [100%] 0 to 100 percent in % increments
*Total delay possible is 1150ms
There are three levels of tapped delays in the NIGHTBASS. These are what we call
Even (E), Shortened (S), and Lengthened (L). (1's are Even, 2's are Shortened,
3's are Lengthened) Even means that the delay taps are at evenly spaced
intervals. Shortened means that as the taps approach the set delay, the intervals

DELAY ALGORITHMS

(L)
(L)
31