Led Effect Indicator Array; Input Level Indicators - Art SGX-NightBass User Manual

abbreviated description of effects stored, effects to be selected or deleted in
the preset, and effect parameter information. Other information may appear here
also. The view angle may be adjusted and is covered in the following section
under the UTILITY function.
A user or factory preset would be displayed in the LCD like:
NIGHTBASS
3 CMP+DST+REV 1
In the center of the bottom half of the display, three letter abbreviations of
the effects in the preset appear.
The number displayed at the bottom left side of the LCD indicates how many
effects are present in the preset. A number at the far right of the bottom half
of the display indicates how many MIDI controllers are assigned to the preset
when Performance MIDI is engaged.
NIGHTBASS
5 CMP+DST+REV 1
To view the information, press the Value button and turn the Encoder left or
right.

LED EFFECT INDICATOR ARRAY

Under the LCD are 16 individual LED's which indicate at all times what effects
are present and active in a preset. When an LED is lit, it indicates which effect
is present and active in the preset you are currently using. A flashing LED
indicates the effect is present in the preset but has been turned "off" from an
external controller such as the X-15 ULTRAFOOT.

INPUT LEVEL INDICATORS

Three front panel LED's indicate signal level at all times. They are labeled:
PRES, NOM, and CLIP. These LED's display the status of the input signal after it
has passed the Drive control, Digital Processor Input level control, Second Stage
Equalizer and the programmable seven band equalizer. The bottom LED (PRES) is
green and lights when a small amount of signal is seen by the NIGHTBASS. When you
are operating with a nominal amount of signal the middle yellow LED (NOM) lights.
Clipping is indicated by the top red LED (CLIP).
Adjust the input level to operate the NIGHTBASS with the NOM LED lit the majority
of the time. Allow for transients to light the CLIP LED occasionally. Some
factory presets may have their internal levels set so only the PRES LED lights,
there is nothing wrong with this. You may want to create some presets for softer
sounds also.
Be sure you are not causing the NIGHTBASS to clip with the front end level,
analog effects and equalizer settings.
6
The title appears in the top half of the display. It
may be up to sixteen characters long.
A left or right arrow [ , ] indicates more
information is available for viewing.