Required Tools - Juniper SRX 5600 Getting Started Manual

Required Tools

To unpack the services gateway and prepare for installation, you need the following
tools:
The device must be installed into a rack that is secured to the building structure.
The device should be mounted at the bottom of the rack if it is the only unit in
the rack.
When mounting the device in a partially filled rack, load the rack from the bottom
to the top with the heaviest component at the bottom of the rack.
A mechanical lift—recommended
Phillips (+) screwdrivers, numbers 1 and 2
2.5 mm flat-blade (–) screwdriver
3/8-in. nut driver
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the
shipping pallet
Electrostatic discharge (ESD) wrist strap
Antistatic mat
Step 1: Prepare the Site
Step 1: Prepare the Site
5