Chapter 42: Replacing The Palm-Rest Assembly; Procedure; Post-Requisites - Dell XPS 15 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
Place the palm-rest assembly on a clean and flat surface.
Post-requisites
1. Replace the keyboard.
2. Replace the system board.
3. Replace the power-adapter
4. Replace the display assembly.
5. Replace the fans.
6. Replace the heat-sink assembly.
7. Replace the speakers.
8. Replace the wireless card.
9. Follow the procedure from step 3 to step 6 in
10. Replace the memory modules.
11. Replace the battery.
12. Replace the base cover.
Replacing the palm-rest assembly
computer. After working inside your computer, follow the instructions in
port.
"Replacing the hard drive".
Replacing the palm-rest assembly
42
After working
www.dell.com/
69