NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Remove the screws that secure the video fan (JFAN_2) to the system board.
2. Disconnect the touch-screen cable from the system board.
3. Peel off the tape that secures the touch-screen cable to the video fan (JFAN_2).
4. Note the routing of the touch-screen cable and remove the cable from the routing guides on the video fan (JFAN_2).
5. Disconnect the video fan (JFAN_2) cable from the system board.
6. Lift the video fan (JFAN_2) away from the palm-rest assembly.
30
Removing the fans
computer. After working inside your computer, follow the instructions in
Removing the fans
17
After working
www.dell.com/