NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Place the power-adapter port into the slot on the palm-rest assembly.
2. Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3. Replace the screw that secures the power-adapter port to the palm-rest assembly.
4. Connect the power-adapter port cable to the system board.
Post-requisites
1. Replace the
display
assembly.
2. Replace the battery.
3. Replace the
base
cover.
58
Replacing the power-adapter port
Replacing the power-adapter port
computer. After working inside your computer, follow the instructions in
34
After working
www.dell.com/