Chapter 41: Removing The Palm-Rest Assembly; Prerequisites; Procedure - Dell XPS 15 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the memory modules.
4. Follow the procedure from step 1 to step 4 in
5. Remove the wireless card.
6. Remove the speakers.
7. Remove the heat-sink assembly.
8. Remove the fans.
9. Remove the display assembly.
10. Remove the power-adapter
11. Remove the system board.
12. Remove the keyboard.
Procedure
After performing the steps in the prerequisites we are left with the palm-rest assembly.
1. palm-rest assembly
68 Removing the palm-rest assembly
Removing the palm-rest assembly
computer. After working inside your computer, follow the instructions in
"Removing the hard
port.
drive".
41
After working
www.dell.com/