Electronics Temperature; Peak Values - Siemens SITRANS LR250 Operating Instructions Manual

Fault Code
S8
S9
S12
S17
S18
To clear a fault using the handheld programmer:
a) Enter the fault code number then press RIGHT arrow

3.3. Electronics Temperature

To access the following parameters via AMS Device Manager see Electronics
Temperature under Maintenance & Diagnostics (LTB) on page 59.
3.3.1. Minimum Value
The minimum recorded internal electronics temperature, reported in units
defined in Temperature Units (2.3.4.).
3.3.2. Maximum Value
The maximum recorded internal electronics temperature, reported in units
defined in Temperature Units (2.3.4.).

3.4. Peak Values

3.4.1. Minimum Measured Value
The minimum recorded Sensor value, reported in units defined in Unit (2.3.1.).
3.4.2. Maximum Measured Value
The maximum recorded Sensor value, reported in units defined in Unit (2.3.1.).
Page 118 SITRANS LR250 (FF) – OPERATING INSTRUCTIONS
Device Service Reminder 1 (Maintenance Required)
Device Service Reminder 2 (Maintenance Demanded)
Internal Temperature High
Calibration Schedule Reminder 1 (Maintenance Required)
Calibration Schedule Reminder 2 (Maintenance Demanded)
Description (cont' d )
.
7ML19985KL01