Setup Page - AMX NetLinx NXP-TPI/4 Operation/Reference Manual

Firmware Pages and Descriptions
G4 Setup Navigation Button Elements (Cont.)
Video Adjustment:

Setup Page

The page (FIG. 40) centers around the basic properties used by the touch device connected to the
NXP-TPI/4 such as: Connection Status of the TPI/4, Display Timeout, Inactivity Page Flip Time, and
Inactivity page file information for the TPI/4 device.
FIG. 40 Setup page
The elements of the Setup page are described in the table below:
Setup Page Elements
Exit:
Connection Status icon:
56
Press the Video Adjustment button to access the main video page (either Video
Setup for a TP4-VID or RGB Setup for a TP4-RGB) where you can set the
video properties for incoming signal.
• The displayed page is associated to the TP4 card being used on a selected
Slot ID (default = Slot 1).
• A TPI/4 can use any combination of up to four (4) TP4 cards
(TP4-RGB or TP4-VID).
• Refer to the Video Adjustment - Video Adjustment section on page 63 for
more detailed information.
Returns you to the Main touch panel page. In this case, the previous page is the
default Main page.
This visual display of the connection status allows the user to have a current
update of the TPI/4's connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI/4 has established a connection with
a currently secured target Master (requiring a username and password).
Connection Status
Red Connection Status icon -
indicates no connection to
a Master
Green Connection Status icon -
indicates communication
to a Master
NXP-TPI/4 NetLinx Touch Panel Interface