Port Address - American Dynamics DV16000 Installation And Operating Instructions Manual

®
Intellex Digital Video Management System Installation and Operating Instructions
92

PORT ADDRESS

In the Port Address setup screen you may specify a fixed port
address for the Intellex unit to use for connecting to a network.
SETUP
The default settings are 5000 for the Communications Port and
5001 for the LiveVideo Port. Unless instructed otherwise by your
IS administrator, you should accept these settings, as they
correspond to the default settings in the Network Client software.
If you do change port address assignments, they will take effect
only after the unit is restarted.
See the Connecting Network Client with the Remote Intellex Unit
section in the Network Client Installation & Operating Instructions
for details on configuring the Network Client software to
communicate with your Intellex unit.
Port Address Setup MORE>>>