Alarm Connectors - American Dynamics DV16000 Installation And Operating Instructions Manual

®
Intellex
190
ALARM
CONNECTORS

Alarm Connectors

Digital Video Management System Installation and Operating Instructions
The alarm connectors accept up to 16 alarm inputs and 16 alarm
outputs. Use the information in this appendix to install your
alarm devices to the back of the unit.
NOTE: The polarity of all alarm inputs is programmable (see
System Setup, Alarm
alarm outputs is active-high. Also, the alarm outputs are
initialized to inactive low on power-up.
Figure 5 — Alarm Connectors on Rear Panel
Attach the alarm inputs, outputs and grounds to the connectors,
according to the pin assignments (refer to
Connector Pin Assignments for DV16000
Setup). However, the polarity of all
Table 1 — Alarm
on the next page).
MORE>>>