American Dynamics DV16000 Installation And Operating Instructions Manual page 140

Intellex digital video management system
Hide thumbs Also See for DV16000:
Table of Contents

Advertisement

®
Intellex
140
Filters Search
Image Database Search
Digital Video Management System Installation and Operating Instructions
Click New to clear the current search criteria on all of the search
screens and begin a new search. The unit erases the previous
search results from the screen. Click Close to close this screen.
Either the main screen or the playback screen appears. Click Help
to display online help for this screen.
Search Results — The unit lists all video segments that match
the search criteria in this area (see
Use the Filters screen to search the image database using the
Smart Search filters.
NOTE: This tab only appears if the With Image Filters option is
selected on the Mode screen (see
Camera — Use this option to select the camera to be searched.
You will configure the search filter for this camera.
1.
Click down arrow. A list of camera names appears in camera
number order (1–16). The first is the default.
2.
Use the scroll bar to display cameras that are hidden. Click
up arrow or down arrow or drag the scroll button up or
down. Click the desired camera.
Duration (min:sec) — Use this option to limit multiple listings
of the same event during a search. When a video segment fulfills
the search criteria, the unit lists it in the search results area. Then
the unit skips ahead in the image database to search for the next
event.
Example: There is a bridge that takes about 30 seconds to cross.
To look for a truck crossing the bridge, set the duration to 00:30.
When the unit finds a segment with bridge activity, it lists the
segment and skips ahead 30 seconds before continuing. It only
lists one segment. If the duration was set to 10 seconds, the unit
would list three different segments of the same event, at 10-
second intervals.
This option can be set from five seconds to 10 minutes. The
default is 00:05 (five seconds).
1.
Click the minutes display.
2.
Click up arrow or down arrow to display the correct minutes
(1–10).
3.
Click the seconds display.
Working with Search
Results).
Image Database
MORE>>>
Search).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents