American Dynamics DV16000 Installation And Operating Instructions Manual page 85

®
Intellex Digital Video Management System Installation and Operating Instructions
Alarm In Polarity Setup
Alarm Setup
Use the Alarm In Polarity screen to set the polarity for each of the
alarm inputs.
NOTE: The virtual keyboard is disabled on the Alarm In Polarity
screen.
Alarm Input — The names of each alarm input are listed in the
Alarm In Polarity screen. These names are configured in the
Alarms In Names screen.
Polarity — Select the desired polarity for this alarm input:
Active-Low or Active-High. That is, select the signal that triggers
an alarm. The default setting is Active-Low.
1. Click down arrow for the alarm input. The two polarity
options appear.
2. Click the desired alarm input polarity.
Click OK to accept the displayed alarm input polarity settings, as
well as any changes on the other Alarm Setup screens, and return
to the Setup Options screen. Click Cancel to cancel the changes.
Click Help to display online help for this screen.
85
MORE>>>