American Dynamics DV16000 Installation And Operating Instructions Manual page 186

®
Intellex Digital Video Management System Installation and Operating Instructions
186
Database Partially Full
The Notify when _____% full option on the Record Mode screen
controls when the unit displays a message to the operator (see
Record Mode Setup).
When the percentage of unarchived images in the image database
reaches this setting, the unit flashes the Alarms indicator on the
front panel. It also energizes alarm output 16 if the Message
Alert option is selected (see Alarm Setup). Then it displays the
following screen (with the appropriate percentage):
NOTE: This screen only appears when Linear is selected on the
Record Mode screen.
Select one of the following options and click OK:
Halt when database is full. — Select this option to halt image
recording when the image database is full.
You must click the Begin Record button on the Utility Options
screen to start recording again (see Utility Options).
Notify me again when 90% ful l . — Select this option to clear the
notification screen. The unit displays another notification screen
when the database becomes 90% full. This option is disabled
when the image database is at least 90% full (see Database 90%
Full).
Continue at beginning when full. — Select this option to
continue recording images from the beginning of the image
database. When the database becomes full, the unit behaves as if
circular mode is selected, recording over the oldest images.
Linear Mode Operation MORE>>>