Call Monitor - American Dynamics DV16000 Installation And Operating Instructions Manual

®
Intellex Digital Video Management System Installation and Operating Instructions
166
OPTIONS

CALL MONITOR

Use the Call Monitor screen to configure the call monitor's
display of live video from a single camera. First under Mode
SETUP
select either Call mode or Spot mode. Then under Call Camera,
select the specific camera to display on the call monitor. Only one
mode can operate at a time. You can change modes in one of two
ways: on the Call Monitor setup screen select the desired mode
(and then the specific camera), or right-click anywhere in the
image area and select the desired mode and camera from the
popup.
Call Mode displays video at the user's request. After selecting a
camera for Call Mode display, right-click in the image area, select
Call Monitor on the popup, then on the next popup select Call
Mode, and on the last popup select a specific camera. The
selected camera's live video will be displayed on the call monitor.
You can also change modes in the image area by right-clicking,
selecting Call Monitor on the popup and then selecting the
desired mode.
Spot Mode displays live video from alarmed cameras to the call
monitor. To select Spot Mode, right-click in the image area, select
Call Monitor on the popup, then on the next popup select Spot
Mode. Then video from the alarmed cameras will be displayed,
for the duration of the alarmed segments as configured in Alarm
Setup.
Options MORE>>>