American Dynamics DV16000 Installation And Operating Instructions Manual page 60

®
Intellex
60
Deleting a Segment
Schedule Setup
Digital Video Management System Installation and Operating Instructions
5. When the desired times appear, release the mouse button.
When changing the times of adjacent segments, the unit
chooses the segment that you are enlarging. Then it displays
the times for that segment.
For example, when enlarging an alarmed segment (00:00 to
07:00) that is next to an active segment (07:00 to 18:00), click
on the boundary between the segments (07:00) and drag
right. The unit displays the alarmed segment's new times, as
long as the boundary stays to the right of 07:00. If the
boundary is dragged left past 07:00, the unit chooses the
active segment and displays the new times for the active
segment.
6. After changing an active or alarmed segment, configure its
live filter and other settings (see
Segment
1. Select the appropriate screen: Weekday, Weekend or Holiday.
2. Use one of the following methods to delete a segment:
Create a new segment over the segment to delete.
Change the start time of the segment to match its end time.
Change the start time of the next segment to the start time of
the segment to delete.
Change the end time of the previous segment to the end time
of the segment to delete.
Use the custom schedule popup menu to delete the segment
(see Custom Schedule Popup
and Configuring an Alarmed
Menu).
Configuring an Active
Segment).
MORE>>>