American Dynamics DV16000 Installation And Operating Instructions Manual page 120

®
Intellex
120
Exit to System
Utility Options
Digital Video Management System Installation and Operating Instructions
CAUTION: Do NOT modify any BIOS or system settings. Do
NOT reconfigure any hard drives. Do NOT install any
other software, including screen savers, or you will
affect unit operation.
Use this option to exit from the Intellex system and gain access to
the Windows operating system.
NOTE: Exiting to the system is a protected feature. You must
possess the Exit to System privilege to access it (see
Security
1. From the main screen, click the Utility button. The Utility
Options screen appears (see
2. Click Exit. A confirmation message appears.
3. Select No to cancel the exit process and return to the Utility
Options screen. Click Yes to exit Intellex and go to Windows.
The Enter PIN Code screen appears.
4. Enter the system exit code. (Contact your dealer or
Sensormatic for this code.) The unit displays asterisks as a
security measure.
a. Use the mouse pointer to click the numeric buttons to
enter the code.
b. Click backspace to erase an entry.
c. Click OK to exit Intellex and go to the Windows
operating system.
The system verifies the code. If you entered an incorrect PIN
code, the system returns to normal operation. If you entered
the correct PIN code, the system exits Intellex and goes to
Windows.
To restart the Intellex system from the operating system:
Double-click the Intellex icon on the screen.
To shut down from the operating system:
1. Double-click the Intellex icon on the screen.
2. Shut down the system using the Shutdown option on the
Utility Options screen (see Shutdown).
Setup).
Utility Options).
MORE>>>