Installing Ip Sdu8 With An Indoor Hardmount; Preparing And Installing The Indoor Hardmount Housing; Parts Required; Tools Required - American Dynamics IP SpeedDome Ultra 8 Installation Manual

3 Installing IP SDU8 with an Indoor Hardmount

Preparing and installing the Indoor Hardmount Housing

Parts Required

• RJ-45 connector
• RJ-45 inline coupler adapter
• 3 way power connector, 2109-0651-03
• 6 way alarm connector, 2109-0648-06
• 5 way alarm connector, 2109-0650-05
Note
For installation to a tile ceiling, also order the UL-approved RH2x2 Metal Plate Mounting Kit.
• Install Kit, 0352-0020-01
• Wire, hanging 3.6m (12ft), 2898-0007-01
• Card, quick connect, 12402-2055-02
• Template, cutout, hard mount, 12402-2054-01

Tools Required

• Screwdriver
• Pliers
• RJ-45 crimping tool
• Power drill
• Hammer
• Socket wrench kit with extension (metric)

Mounting Requirements

• Mounting space: ensure there is the following space above the ceiling to accommodate the
dome.
• Height above ceiling:
• Using side entry conduit – 230mm (9.1in)
• Using top entry conduit – 330mm (13 in), assuming a 75mm (3 in) right angled fitting is
employed to minimize the height
• Diameter: 192mm (7.5in)
• Structural members: verify that ceiling members can support the camera dome and mounting
structure, if used.
3-1