Nortel Passport 8600 Series Manual page 58

58 Chapter 2 Installing Passport 8600 modules and connecting equipment
Table 14 Connectors and cables for Passport 8600 modules (continued)
Module Port
8632TXE 1000 Mb/s
Ethernet port
10/100 Mb/s
Ethernet ports
8648TXE 10/100 Mb/s
Ethernet ports
8672ATME OC-3
OC-3
OC-3
8672ATME OC-12
OC-12
OC-12
8683POSE OC-3
OC-3
OC-3
8683POSE OC-12
OC-12
OC-12
8691SF Ethernet
Management
port
Serial ports
312749-B Rev 00
Connector Recommended cable type
Duplex SC Depends on installed GBIC model; for specifications, see
"GBICs" on page 63
RJ-45 EIA Category 3, 4, or 5 UTP
wired as for 10 Mb/s operation;
MDI-X EIA Category 5 UTP required
for 100 Mb/s operation
RJ-45 EIA Category 3, 4, or 5 UTP
wired as for 10 Mb/s operation;
MDI-X EIA Category 5 UTP required
for 100 Mb/s operation
MT-RJ 9/125 µm single-mode fiber
optic cable
MT-RJ 62.5/125 µm multimode fiber
optic cable
Duplex SC 9/125-µm single-mode fiber
optic cable
Duplex SC 62.5/125 µm multimode fiber
optic cable
MT-RJ 9/125 µm single-mode fiber
optic cable
MT-RJ 62.5/125 µm multimode fiber
optic cable
Duplex SC 9/125-µm single-mode fiber
optic cable
Duplex SC 62.5/125 µm multimode fiber
optic cable
RJ-45 EIA Category 3, 4, or 5 UTP
for 10 Mb/s operation;
EIA Category 5 UTP required
for 100 Mb/s operation
DB-9 RS-232
Note: Ports on the Passport 8632TXE and 8648TXE Modules are wired
as MDI-X. Use straight-through cables to connect these ports to MDI
connections such as workstations or servers. Use crossover cables to
connect these ports to other MDI-X connections such as hubs or other
switches.
Maximum cable length
328 ft (100 m)
328 ft (100 m)
9.3 mi (15 km)
1.24 mi (2 km)
9.3 mi (15 km)
1640 ft (500 m)
9.3 mi (15 km)
1.24 mi (2 km)
9.3 mi (15 km)
1640 ft (500 m)
328 ft (100 m)
328 ft (100 m)