Passport 8624Fxe Module; Table 5 Passport 8616Sxe Module Leds - Nortel Passport 8600 Series Manual

28 Chapter 1 Passport 8600 modules
Table 5

Table 5 Passport 8616SXE Module LEDs

Type Label Color/State
Port TX Green/Blinking
Off
RX Green/Steady
Green/Blinking
Amber/Steady
Off
Module Online Green/Steady
Amber/Steady
Off

Passport 8624FXE Module

The Passport 8624FXE Module
long-distance connections for backbone and riser applications. The module
consists of a printed circuit board with status LEDs and 24 100BASE-FX ports.
Figure 9 Passport
Link/Act
1 = 100BASE-FX port
2 = Port LED
3 = Module Online LED
312749-B Rev 00
describes the Passport 8616SXE Module LEDs.
Meaning
The port is transferring data.
There is no port activity.
The port has established a link and is enabled.
The port is receiving data.
The port has either no optical signal or no link synchronization.
The port has a signal but no link.
The module has completed its power-on self-test and software
initialization and is operating normally.
The module failed its power-on self-test.
The switch power is off, or the power has been turned on and the
module is going through its power-on self-test and software
initialization. A module in this state is not yet functional.
8624FXE
2
1 2 3 4 5 6 7 8
1
(Figure 9) uses fiber optic technology to allow
Module
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Online
3
9402EB