Passport 8632Txe Module; Figure 11 Passport 8632Txe Module; Figure 12 Passport 8632Txe Module Leds - Nortel Passport 8600 Series Manual

Passport 8632TXE Module

The Passport 8632TXE Module
with status LEDs, 32 autonegotiating 10/100 Mb/s ports, and two bays for
1000BASE-X gigabit interface connectors (GBICs).

Figure 11 Passport 8632TXE Module

1 = 10/100 Mb/s port
2 = Port LEDs: 10/100 (speed), link/activity
3 = GBIC bay
4 = GBIC TX and RX LEDs
5 = Module online LED
The Passport 8632TXE Module ports support the IEEE 802.3u autonegotiation
standard. Each port can operate in full- or half-duplex mode. When a port is
connected to another device that also supports the IEEE 802.3u autonegotiation
standard, the two devices negotiate the highest possible data rate and the duplex
mode of operation.
Figure 12

Figure 12 Passport 8632TXE Module LEDs

1 = Port LEDs: 10/100 (speed), link/activity
2 = GBIC TX and RX LEDs
3 = Module online LED
2
1
shows the location of the Passport 8632TXE Module LEDs.
1
Chapter 1 Passport 8600 modules 31
(Figure 11) consists of a printed circuit board
2 3
TX
RX
10459EA
Installing Passport 8600 Switch Modules
5
TX
RX
3 4
10458EA