Method 2: In-House Station Accessible; Programming The Other Already Programmed Bell Buttons - TCS VPES Series Product Information

Method 2: In-house station accessible

LED illuminates
1
Press briefly
2
2)
Lift handset Press until
at the Prog2 tone
in-house sounds
station. ...
3
press briefly

Programming the other already programmed bell buttons

• Step 1
• repeat step 2 each time for additional bell buttons where necessary
• complete the programming of all buttons with step 3
Note
Repeated programming of an already programmed bell button always only changes the
second serial number. If you want to change the first programmed serial number, you have
to delete both serial numbers and then re-program both serial numbers.
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone.: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
LED flashes
...and
Noprog tone sounds at
1)
sounds
LED illuminates
16
... and ring tone release replace
front-door and
in-house station.
programming
mode
of system
switched on
bell button
programmed
handset
at in-house
station.
programming
mode
of system
switched off
Subject to change without notice.
PI_GB_VPES_VPDS_Art0016079_2v0.doc mi
05/2006