Technical Data; Application; Brief Description; Basic Functions - TCS VPES Series Product Information

Supply voltage:
Case:
Name plate glass:
Operating temperature range:
Input current:
Maximum input current:
camera features bw-camera:
photo sensitivity:
IR-LED-Illumination:
focal length:
diagonal capture:
video output
based on the TCS-video system in a 6-wire technique
VPDS, VPES are front-door station series with video for surface mounting for external use.

Basic functions

Bell buttons
Saving the bell button alloca-
tions in the front-door station
Camera
Image activation
Image deactivation
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone.: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
6

Technical data

24 V ± 8 % (via power supply and control unit)
aluminium, anodised
plexiglass
-20°C to 50°C
I(a) = 2.8 mA, I(P) = 200 mA standby
I(Pmax) = 240 mA
CCD-sensor 380 TVL
0.2 Lux
for short distance
f = 3.7
90°
1 Vpp composite video balanced

Application

Brief description

• Operating a programmed bell button triggers a ringing
tone at the in-house station.
• Operating an unprogrammed bell button triggers the
light switch function in the power supply and control
unit.
• When operating a bell button an acknowledgement
tone sounds.
All programmed data (serial numbers and parameters)
are stored in the EEPROM. If the front-door station
requires replacement, the EEPROM board can be
removed from the programmed front-door station and
inserted into the new front-door station of identical
design.
black/white-camera, image activation constantly enabled
(video signal always connected)
• with operation of a bell button or
• operation of the function key (to switch on monitor /
between cameras) on the video in-house station
replacing the handset or automatic (preset time)
Subject to change without notice.
PI_GB_VPES_VPDS_Art0016079_2v0.doc mi
05/2006