Maintenance After A Long Stop Period; About The Refrigerant; Recommended Maintenance And Inspection - Daikin CO2 Conveni-pack LRYEN10A7Y1 Installer And User Reference Manual

9 | Maintenance and service

9.2 Maintenance after a long stop period

9.3 About the refrigerant

9.4 Recommended maintenance and inspection

Installer and user reference guide
30
E.g., at the beginning of the season.
▪ Check and remove everything that might be blocking inlet and outlet vents of
indoor units and outdoor units.
▪ Clean air filters and casings of indoor units. Contact your installer or maintenance
person to clean air filters and casings of the indoor unit. Maintenance tips and
procedures for cleaning are provided in the installation/operation manuals of
dedicated indoor units. Make sure to install cleaned air filters back in the same
position.
▪ Clean showcase and unit cooler. Maintenance tips and procedures for cleaning
are provided in the installation/operation manuals of dedicated indoor units.
▪ Turn on the power at least 6 hours before operating the unit in order to ensure
smoother operation. As soon as the power is turned on, the user interface
display appears.
This product contains refrigerant gases.
Refrigerant type: R744 (CO
WARNING
▪
Do NOT pierce or burn refrigerant cycle parts.
▪
Be aware that the refrigerant inside the system is odourless.
WARNING
The R744 refrigerant (CO
does NOT leak.
If the unit is installed indoors, ALWAYS install a CO
specifications of standard EN378.
If the refrigerant leaks in high concentrations in the room, it may have negative
effects on its occupants such as asphyxiation and carbon dioxide poisoning. Ventilate
the room and contact the dealer where you purchased the unit.
Do NOT use the unit until a service person confirms that the part from which the
refrigerant leaked has been repaired.
Since dust collects when using the unit for several years, performance of the unit
will deteriorate to some extent. As taking apart and cleaning interiors of units
requires technical expertise and in order to ensure the best possible maintenance
of your units, we recommend to enter into a maintenance and inspection contract
on top of normal maintenance activities. Our network of dealers has access to a
permanent stock of essential components in order to keep your unit in operation
as long as possible. Contact your dealer for more information.
When asking your dealer for an intervention, always state:
▪ The complete model name of the unit.
)
2
) inside the unit is odourless, non-flammable and normally
2
detector according to the
2
LRYEN10A7Y1+LRNUN5A7Y1
CO₂ Conveni-Pack outdoor unit
4P605460-1 – 2020.08