Dimplex VFE 20 Installation And Operating Instructions Manual page 38

English
Key tone ON/OFF
The key tone set at the factory for confirming an entry
can be switched off.
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press and hold the MENU key and
prox. three seconds.
The WINDOW MONITORING symbol flashes.
Use the keys to select the KEY TONE sym-
bol. The symbol flashes.
Press the ENTER key. The ON symbol flashes.
Press the key. OFF flashes.
Press the ENTER key. Setting is complete.
Temperature in energy saving mode
Display or change temperature value.
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press and hold the MENU key and
prox. three seconds.
The WINDOW MONITORING symbol flashes.
Use the keys to select display P5. P5 flashes.
Press the ENTER key. OFF flashes.
Use the keys to select ON. ON flashes.
EN-12
Press the ENTER key. Display P5 down flashes.
Press the ENTER key. Display e.g. 16 °C flashes.
Use the
for energy saving mode.
Press the ENTER key. Setting is complete.
Adaptive startup
NOTE
This menu item may be shown or not shown depend-
ing on the version.
This function guarantees that the set room tempera-
ture is achieved exactly at the start of the comfort pe-
riod.
Example:
In the TIMER menu, a set room temperature of 22° C is
specified for 07:00. The current room temperature is
17° C. The heating device switches on early so that the
specified room temperature of 22° C is reached by
07:00.
key for ap-
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press and hold the MENU key and
prox. three seconds.
The WINDOW MONITORING symbol flashes.
Use the
Press the ENTER key. OFF flashes.
Use the
Press the ENTER key. Setting is complete.
key for ap-
2007/A
keys to select the temperature value
keys to select display P6. P6 flashes.
keys to select ON or OFF.
www.dimplex.eu
Operation
key for ap-