Dimplex VFE 20 Installation And Operating Instructions Manual page 35

Operation
4.2. Main menu
Other setting options are shown in the main menu.
Hold down the Menu key. The display initially
switches to the CHARGING menu. Continue to
hold the key (for approx. 3 seconds in total). The
display switches to the main menu.
Tap on the Menu key briefly again. The auxiliary
heating symbol flashes.
Use the keys to select one of the adjusters
described below:
A - auxiliary heating on/off
B - Timer (week program)
D - Frost protection temperature 7° C
E - Set the time and date
www.dimplex.eu
auxiliary heating
NOTE
This function can only be used if an auxiliary heating
(accessory) is installed.
auxiliary heating ON
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key.
The auxiliaryauxiliary HEATING symbol flashes.
Press the ENTER key. OFF flashes.
Press the key. ON flashes.
Press the ENTER key. Switch-on duration flashes.
Define the switch-on duration with the
Press the ENTER key. Temperature flashes.
Use the
perature.
Press the ENTER key. Setting is complete.
auxiliary heating OFF
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key.
The auxiliary HEATING symbol flashes.
Press the ENTER key. ON flashes.
Press the key. OFF flashes.
Press the ENTER key. Setting is complete.
2007/A
keys to set the desired comfort tem-
English
key.
EN-9