Dimplex VFE 20 Installation And Operating Instructions Manual page 36

English
Timer week program
The timer is pre-programmed at the factory.
See table for factory settings.
Program ON time for comfort temperature
P 1 from 06:30 to 09:30
P 2 from 11:00 to 13:00
P 3 from 15:00 to 17:00
P 4 from 18:00 to 21:00
The ON time (comfort mode) is displayed with ON and
the set comfort temperature.
The OFF time (energy saving mode) is displayed with
OFF.
Four time blocks are available per day.
These can be adapted individually for each weekday.
To change these time blocks, carry out the following
steps:
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key. The auxiliary HEATING sym-
bol flashes.
Select the TIMER symbol with the
TIMER symbol flashes. Press the ENTER key.
Select a weekday.
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
Select a day with the
Press the ENTER key. P1 (Program 1) flashes.
Press the ENTER key. Switch-on time flashes.
Use the keys to set the hours.
Press the ENTER key. Minutes display flashes.
Use the keys to set the minutes.
Press the ENTER key. Room temperature flashes.
Use the keys to set the temperature.
Press the ENTER key. Switch-off time flashes.
EN-10
key. The
5 = Friday
6 = Saturday
7 = Sunday
keys.
Use the
Press the ENTER key. Minutes display flashes.
Use the
Press the ENTER key. P2 (Program 2) flashes.
The programs P2, P3 and P4 can be set in the
same way.
Copying programs P1 - P4
After program P4 is set, the current weekday flashes
again.
Press the
programs P1 - P4 that have just been set are cop-
ied to the selected weekdays (1 - 7).
Frost protection
Specified frost protection temperature of 7° C.
Frost protection ON
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key.
The auxiliary HEATING symbol flashes.
Use the
The FROST symbol flashes.
Press the ENTER key. OFF flashes.
Press the key. ON flashes.
Press the ENTER key. Setting is complete.
Frost protection OFF
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key.
The auxiliary HEATING symbol flashes.
Use the
The FROST symbol flashes.
Press the ENTER key. ON flashes.
Press the key. OFF flashes.
Press the ENTER key. Setting is complete.
2007/A
keys to set the hours.
keys to set the minutes.
keys to set other weekdays. The
keys to select the FROST symbol.
keys to select the FROST symbol.
www.dimplex.eu
Operation