Chapter 3. Operation
Display Only Data Fields
Data fields preceded by an equal (=) symbol cannot be edited. See Figure
3-3 and the instructions listed below.
Figure 3-3.
Step
1
Press Enter to move the cursor to the data field.
2
Use arrows to select
• The unit automatically sets the
• The display field shows the value actually set.
• The equal symbol after LBO in the second line in-
dicates the information that follows is displayed
data and cannot be edited.
Exit Any Menu Field Operation Or Display
Press Cancel as many times as required to return to the desired menu
level or press Home to return to the main menu.
3-8
Display and Data Fields
Action
AUTO
and press Enter.
Line Build Out
TSU 600 User Manual
Data Field
Display Field
.
61202076L1-1