Figure 5-8. Create Temp Selection Screen - ADTRAN 1202076L1 User Manual

Chapter 5. Configuration Menu
1. With the cursor on
selection screen with the cursor positioned on the first selection DS0
number. See Figure 5-8.
Select DSO Number
Figure 5-8.
2. Enter the DS0 number by using either the scroll method or numbers.
Do not mix the use of the keys.
3. Pressing Enter completes the selection and moves the cursor to
the next field.
4. Scroll to select the port which is dependent on the installed option
card.
5. Press Enter to complete the selection and move the cursor back to the
DS0 field.
With the cursor on the DS0 field, the DS0 number can be incremented or
decremented by scrolling. If you press Copy, the contents of the last DS0
entered are placed in the new DS0 number.
When all entries are complete, Cancel moves the cursor to the last of the
submenu choices,
press Cancel to return to the DS0 Map A (B) submenu choices.
Selecting Apply will not disrupt the operation of unmodified ports.
5-14
, press Enter. The unit displays the
CREATE TEMP
Create Temp Selection Screen
6)APPLY . Either apply the newly created DS0 map or
TSU 600 User Manual
Select Port
PORT ,
61202076L1-1