Paging The System; Paging Zones - 3Com 3103 User Manual

108 C 6: G
HAPTER ETTING

Paging the System

Paging Zones

M Y T
ORE FROM OUR ELEPHONE
This method uses default codes in
Page a subset of all extensions on the system, called a zone.
This method uses extensions that the administrator configures for this
purpose.
Each method allows you to broadcast a message to different destinations,
depending on your location and equipment.
Do not press the Feature button before you dial the Paging code.
When you page the system, you broadcast a message to all internal
extensions with speakers, to a Public Address (PA) system, or to both
simultaneously. Paging codes, as described in
for each destination.
Table 7 Paging Codes
Feature
External Paging
Broadcast an announcement over a
public address system that has a
paging amplifier and speaker system
that is connected to your NBX system
Internal Paging
Broadcast an announcement through
the speakers on all NBX Telephones
with speakers on your system except
those that have been set to Do Not
Disturb.
Simultaneous Paging
Broadcast an announcement externally
and internally at the same time.
To page, perform the following steps using your 3Com Telephone:
1 Pick up the handset.
2 Dial the appropriate paging code on your system.
3 Speak the broadcast message into your handset and hang up.
A page zone is a subset of internal extensions to which you can direct a
broadcast using a configured extension. You can page a zone, a P.A.
S
YSTEM
Table
3-digit dial plan
(default codes)
620
621
622
7.
Table 7, have default values
4-digit dial plan
(default codes)
6200
6201
6202