3Com 3103 User Manual page 14

14 C 1: G
HAPTER ETTING
Table 4 Setting Your NBX NetSet Utility and NBX Messaging Password
Feature
Password — Set Initially
If your system uses NBX Messaging, follow the NBX
voice prompts to set your NBX password (which is the
same for the NBX NetSet utility and voice messaging) OR
use the NBX NetSet utility, described next.
If your system uses a voice messaging application
other than NBX Messaging
to set your password for the NBX NetSet utility. 3Com
recommends that you use the same password for the
NBX NetSet utility and your messaging application.
For all voice messaging systems:
Use only 4- to 10-digit numbers
Do not use letters, *, or # as part of your password.
Password — Change
If your system uses NBX Messaging, follow the NBX
voice prompts to change your NBX password (which
changes your NBX NetSet utility password, because they
are the same) OR use the NBX NetSet utility, described
next.
If your system uses a voice messaging application
other than NBX Messaging
to change your password for the NBX NetSet utility.
3Com recommends that you use the same password for
the NBX NetSet utility and your voice messaging
application.
For all voice messaging systems:
If you forget your password, the administrator can reset
it to your extension. Then use this code (for applications
other than NBX Messaging) or the NBX voice prompts to
change it.
S
TARTED
1
, use this code sequence
1
, use this code sequence
3Com Phones
Message button and
follow the voice prompts
OR, for systems that do
not use NBX Messaging:
Feature
+ 434
+ new password
+ #
+ repeat your new
password
+ #
Message button
+ old password
+ #
+ 9
+ 2
+ follow the prompts
OR, for systems that do
not use NBX Messaging:
Feature
+ 434
+ old password
+ #
+ new password
+ #
+ repeat your new
password
Analog Phones
500 ** and follow the
voice prompts
OR, for systems that do
not use NBX Messaging:
#
(Feature Entry Tone)
+ 434
(Feature Entry Tone)
+ new password
+ #
(Feature Entry Tone)
+ repeat your new
password
+ #
(Confirmation Tone)
500 **
+ extension number
+ old password
+ #
+ 9
+ 2
+ follow the prompts
OR, for systems that do
not use NBX Messaging:
#
(Feature Entry Tone)
+ 434
(Feature Entry Tone)
+ old password
+ #
(Feature Entry Tone)
+ new password
+ #
(Feature Entry Tone)
+ repeat your new
password
+ #
(Confirmation Tone)