Sp4-Xxx (Scanner) - Ricoh Aficio 1013 Service Manual

SP4-XXX (Scanner)

4
Mode Number/Name
008* Main Scan Magnification (Scanner)
1
010* Leading Edge Registration (Scanner)
1
011* Side-to-side Registration (Scanner)
1
013 Scanner Free Run
015* White Plate Scanning
1 Start position
2 Scanning area
101* Sub-Scan Magnification (Scanning)
1
SM
USING SERVICE PROGRAM MODE
Function/[Setting]
Adjusts the magnification along the main scan direction,
for scanning.
[–0.9 ~ +9.0 / 0.0 / 0.1%/step] IAJ
• Use the ! key to select "+" or "–" when entering the
value
Adjusts the leading edge registration for scanning in
platen mode.
[–2.0 ~ +5.0 / 0.0 / 0.1 mm/step] IAJ
• (–): The image moves toward the leading edge.
• (+): The image moves toward the trailing edge.
• Use the ! key to select "+" or "–" when entering the
value
Adjusts the side-to-side registration for scanning in platen
mode.
[–0.9 ~ 0.9 / 0.0 / 0.1 mm/step] IAJ
• Increasing the value shifts the image to the right
• Use the ! key to select "+" or "–" when entering the
value
Performs a scanner free run with the exposure lamp on.
[0 = No / 1 = Yes]
• For details about free runs: ☛ 5.1.7.
• After selecting "1", press OK or ' twice to start the run.
Press % to stop.
Adjusts the scanning start position on the white plate for
auto-shading.
[–3.0 ~ +6.0 / 0.0 / 0.1 mm/step]
• Positive settings move the position away from HP.
Adjusts the end position of the white plate scan, in the
main scan direction. The scan begins at the start position
[as set by SP4-015-1] and extends for the specified
length.
[–3.0 ~ +6.0 / 0.0 / 0.1 mm/step]
• The total scanning length (as determined by SP2-015-1
and SP2-105-2) must be at least 2.0mm.
Adjusts the actual sub-scan scanning magnification. The
higher the setting, the lower the scanner motor speed.
[-0.9 ~ +0.9 / 0.0 / 0.1%/step]
5-9 B044/B045/B046