Bypass Feed Clutch (B044 And B046 Only); Bypass Friction Pad (B044 And B046 Only); Registration Clutch - Ricoh Aficio 1013 Service Manual

3.8.6 BYPASS FEED CLUTCH (B044 AND B046 ONLY)

1. Rear cover (☛ 3.3.2)
2. Right door (☛ 3.3.9)
3. Detach the bypass feed clutch
connector [A] from CN3 on the
high-voltage power supply board.
4. Unscrew the bypass feed roller
housing [B] (! × 2), and pull it out of
the machine.
NOTE: It is not necessary to remove
or disconnect the bypass
paper end sensor.
5. Bypass feed clutch [C] (# × 1)

3.8.7 BYPASS FRICTION PAD (B044 AND B046 ONLY)

1. Right door (☛ 3.3.9)
2. Detach the roller housing [B] (! × 2),
and move it out of the way.
3. Bypass friction pad [A]

3.8.8 REGISTRATION CLUTCH

1. Rear cover (☛ 3.3.2)
2. High-voltage power supply board
(☛ 3.12.2)
3. Ground plate [A] (!)
4. Registration clutch [B] ($× 1, " × 1)
NOTE: To free the clutch, pry clip
[C] gently away from it using
a screwdriver.
SM
[B]
3-23
PAPER FEED SECTION
B046R925.WMF
[C]
[A]
B046R937.WMF
[C]
[B]
B046R950.WMF
[A]
B044/B045/B046
[A]