Table of Contents
Advertisement
Recording CD Tracks
(One-Touch Edit Recording)
Memory card operation
Pre parat i on s
Make sure that both the memory card
and CD are in stop modes.
If
is lit,
press the RANDOM key to cancel the
random play mode.
* Do not connect a USB audio player during
recording, as this will stop the recording.
* To change the record mode setup,
see pages 56 to 61.
28
English
Recording all tracks in CD
1
Start recording.
To cancel in the middle:
If the memory card contains a folder named AL_Z90 or
higher, a message [CHECK REFRESH] is displayed and
Hint
recording cannot be started. In this case, it is required to
rearrange the folders by means of refreshing.
(See page 52.)
When recording completes:
The memory card stops
and a message [DATA
WRITING] is displayed.
* Do not switch the system OFF or
apply shock or vibration to it while
[DATA WRITING] is displayed.
* If the power to the system is shut off
before [DATA WRITING] disappears,
the recorded data will be lost.
* It is not possible to let the
recording pause temporarily.
* It is not possible to let the
recording pause temporarily.
When the memory card
becomes full before
completion of recording:
A message [STOP REC No
Capacity] is displayed.
Erase the unnecessary
music files before retrying
r e c o r d i n g f r o m t h e
beginning. (See page 36.)
Advertisement
Table of Contents
