Installing The Ce Decals; Reducing The Tire Pressure; Mounting The Battery Charger On A Wall - Toro Greensmaster eTriFlex 3370 Operator's Manual

9

Installing the CE Decals

If Required (CE-Compliant
Countries)
Parts needed for this procedure:
1 Production year decal
1 CE warning decal (Part No. 139-8321)
1 CE mark decal (Part No. 93-7252)
Procedure
If you use this machine in a country that complies to
CE standards, install the following decals:
•
Production year decal and CE mark decal:
apply the decals on the frame tube below the seat
and serial plate; refer to
Figure 13
1. CE mark decal
2. Production year decal
•
CE warning decal: Apply the CE warning decal
(Part No. 139-8321) over the existing warning
decal (Part No. 139-8320) on the steering-wheel
cover; refer to Figure
Figure 13.
3. Frame tube
14.
1. CE warning decal
10

Reducing the Tire Pressure

No Parts Required
Procedure
The tires are overinflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before turning on the machine; refer to
Tire Pressure (page
11
Mounting the Battery
Charger on a Wall
g280284
Optional
No Parts Required
Procedure
You can mount the charger on a wall using the
wall-mount key holes cut into the back of the unit. Use
screws that have a 6 mm (1/4 inch) diameter shaft
and a head diameter of 11 mm (0.45 inch).
Important:
Survey your work area and determine
a location that best meets the criteria for safe and
effective operation of the charger.
13
Figure 14
Checking the
44).
g235881