Infocenter - Toro Greensmaster eTriFlex 3370 Operator's Manual

Figure 18
1. Traction pedal—forward
2. Traction pedal—reverse
Figure 19
You can configure the maximum ground speed as
follows:
•
3.2 to 8 km/h (3 to 5 mph) forward mowing speed
•
8 to 16 km/h (5 to 10 mph) transport speed
•
3.2 to 4.8 km/h (2 to 3 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal (Figure
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
Brake Pedal
Press the brake pedal (Figure
3. Steering-arm-locking
pedal
18) and raise or lower the
20) to stop the machine.
1. Parking brake
g014603
Parking Brake
Use the parking brake
machine from moving. To engage the parking brake,
push down on the brake pedal and press the top
forward to latch. To release the parking brake, press
the brake pedal until the parking-brake latch retracts.

InfoCenter

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information
about your machine, such as the operating status,
various diagnostics, and other information about the
machine (Figure
information screen, cutting unit (CU) motor information
g005105
screen, and traction information screen.
•
Splash screen: shows current machine
information for a few seconds after you move the
key to the O
•
Main information screen
current machine information while the key is in the
O position. This screen shows the battery-system
N
charge level and the amperage.
1. Battery-system amperage
•
CU motor information screen
shows the speed and current of each cutting-unit
motor.
16
Figure 20
2. Brake pedal
(Figure 20) to prevent the
24). There is a splash screen, main
position.
N
(Figure
Figure 21
2. Battery-system charge
level
(Figure
g236365
21): shows
g292768
22):