Installing The Refuse Container; Installing The Decals - Toro 08884 Operator's Manual

Warning
Incorrect battery cable routing could damage the
machine and cables causing sparks. Sparks can
cause the battery gasses to explode, resulting in
personal injury.
• Always disconnect the negative (black) battery
cable before disconnecting the positive (red)
cable.
• Always connect the positive (red) battery cable
before connecting the negative (black) cable.
Warning
Battery terminals or metal tools could short
against metal machine components causing sparks.
Sparks can cause the battery gasses to explode,
resulting in personal injury.
• When removing or installing the battery, do not
allow the battery terminals to touch any metal
parts of the machine.
• Do not allow metal tools to short between the
battery terminals and metal parts of the
machine.
3. Secure the negative cable (black) to the negative (–)
terminal of the battery with a capscrew and locknut
(Fig. 2).
4. Coat the terminals and mounting fasteners with
petroleum jelly to prevent corrosion. Slide the rubber
boot over the positive (+) terminal to prevent a possible
short from occurring.
5. Install the battery clamp and secure the battery with the
rods and wing nuts.

Installing the Refuse Container

Slide the refuse container onto the mounting studs on the
front of the fuel tank (Fig. 3).
1
1. Refuse container

Installing the Decals

®
Affix an Infield Pro decal over each Sand Pro decal, if
desired.
10
Figure 3