Mitel MiVoice Business Troubleshooting Manual page 253

C 11
HAPTER
(Continued) (Sheet 10 of 17)
Table 11.3:
Error Number
4350
4501
4503
4704
4706
4707
4708
Severity
WARNING
FATAL
FATAL
ERROR
ERROR
Description
vtxd40: Call to vb_get_cpid
failed
vb_get_cpid() is a call to the
VBPC driver that is done
through a vtgservice call to
the VOXDRV.
To examine the exact reason
why this failed, look at the
VBPC log file which is located
in c:\vbpc\log\vbpclog.dat.
System Parameters have
FAILED to be set
This can come out in the
same situation as above only
if there is a problem with
the PARM.BIN file.
vtxinit - Error starting the
Voice Board
file_name= file , d40derr=
error
There was an error
attempting to open or write to
the named file. It has to do
with recording, but the actual
filename dictates which part
of the recording process was
affected.
Mbox size Error ret= ret
Mbox size Error ret= ret
x_size_folders:Error ret= ret ,
tag= tag
These messages occur when
there is something wrong a
particular mailbox MSG file.
ret is the return value of
x_size() and has the following
meanings.
-2 = The mailbox is full
-3 = The tag value in the file
is not correct
-4 = The file handle passed in
was invalid
V M S L
OICE AIL YSTEM OGS
U L
SING OGS
Solution/Action
If vbpclog.dat does not
give enough
information, contact
your service
representative.
Contact service
representative
Contact your service
representative
Make sure the mailbox
is not full.
If not full, try renaming
the MSG file.
Regardless of the
results of the above,
contact your service
representative
246