Sealing The Envelope Only, Bypass All Printing; Zeroing The Scale - Pitney Bowes SendPro C Auto Operator's Manual

Note: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the
moistener brush and wick.

Sealing the envelope only, bypass all printing

1. Tap Print on Envelopes.
2. Tap Print Mode on the lower left side of the Envelope Printing mail screen. You may have to
swipe up on the screen to see this option.
3. Swipe up on the Print Mode screen and tap Seal Only.
4. Tap Apply.
5. Load the envelopes onto the feeder with the flap side facing down and the top edge against the
rear wall.

Zeroing the scale

Zeroing the scale sets the weight with nothing on the scale to zero. To zero the scale:
1. Tap Print on Envelopes on the Home screen.
2. Tap the Weight button.
3. Ensure that nothing is on the scale.
4. In the Weighing Method screen, tap the option button for the Scale.
Pitney Bowes Operator Guide November 2019
Printing on envelopes
72