Sealing Envelopes - Pitney Bowes SendPro C Auto Operator's Manual

7. Tap the class you want. If necessary, select Start Over to display all of the class options.
8. Select any special services required.
9. Tap Apply.
10. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes automatically .

Sealing envelopes

This procedure describes how to seal envelopes whether you are printing postage on the envelopes or
only sealing the envelopes (no postage).
1. Check the level of sealing solution by checking the sight window on the front of the feeder deck.
2. Place the envelopes with the flap side facing down and the top edge against the rear wall.
Pitney Bowes Operator Guide November 2019
Quick start guide
20