Printing Additional Postage; Re-Dating Your Mail - Pitney Bowes SendPro C Auto Operator's Manual

Printing on envelopes

Printing additional postage

Correct the postage on a piece of mail by printing additional postage directly on a blank area on your
envelope or on a tape.
1. Tap Print on Envelopes on the Home screen.
2. Scroll down and tap Class on the left side of the Envelope Printing screen.
3. Tap Domestic Lettermail.
4. Tap Other Payments.
5. Tap Postage Correction.
6. Tap the postage correction range you're applying: $0.01-0.86 or $5.96-650. Canada Post
regulations stipulate that postage correction values are not allowed within the range of the
Lettermail rating structure ($0.87-5.95). If amount required is within this range, more than one
stamp will be required. For example, 2 stamps at $0.49 to be able to correct $0.98.
7. Use the keypad to enter the additional postage amount.
8. Tap Apply.
9. Verify the amount and tap Apply.
10. Feed a tape through the machine.
11. Apply the tape beside or below the original impression as shown.
The tape must not overlap the original impression or cover any address information.
l
The word Correction appears on the tape.
l

Re-dating your mail

If you've already printed today's date and postage on an envelope, but you missed your mail pickup, you
can re-date your mail. You must reprint a future date on the back of your envelope before you can mail it.
1. Tap Print on Envelopes on the Home screen.
2. Scroll down and tap Class on the left side of the Print on Envelopes screen.
3. Tap Domestic Lettermail.
Pitney Bowes Operator Guide November 2019 67